House Rendering

Guide · Homeowners · 4 min read · Updated 17 November 2026

Lime Render for Period Homes: Why Cement Render Causes Damp

Short answer

Period homes with solid walls, usually built before about 1919, rely on moisture evaporating out through the wall surface. Cement render is dense and less vapour-permeable, so it can trap water, causing damp, salt damage and blown render. Lime render is softer and breathable, letting walls dry out. It costs around £70–£120 per m² and is the standard choice for listed and historic buildings.

Lime Render for Period Homes: Why Cement Render Causes Damp

How solid walls handle moisture

Most houses built before the First World War have solid walls of brick or stone, with no cavity and often no physical damp-proof course. They were designed to absorb some rain and ground moisture and then release it back to the air through breathable lime mortars, renders and limewash. As long as moisture can get out as easily as it gets in, the wall stays in balance.

Modern cavity walls work differently, keeping rain out with an outer leaf and a cavity. Problems begin when materials designed for cavity walls are applied to solid ones.

Why cement render causes problems

Through much of the twentieth century, many old houses were re-rendered or re-pointed with cement. Cement render is hard, dense and much less vapour-permeable than lime. It also tends to crack as the softer wall behind it moves. Rain then gets in through the cracks, but cannot evaporate back out through the dense render, so water builds up behind it.

The result is often damp patches inside, salt staining, decaying brick or stone faces, and render that sounds hollow when tapped and eventually falls away. Freeze-thaw cycles in winter accelerate the damage. Removing failing cement render and replacing it with lime often allows the wall to dry out over time.

PropertyLime renderCement render
Vapour permeabilityHigh, walls can breatheLower, can trap moisture
FlexibilitySoft, accommodates movementRigid, prone to cracking
Effect on old masonrySacrificial, protects the wallCan accelerate decay
CuringSlow, weather-sensitiveFaster
Typical price per m²£70–£120£45–£70 painted

Signs your render may be wrong for the wall

If you own an older solid-walled home with cement render, look for warning signs. These include damp patches on internal walls that do not respond to other fixes, hollow-sounding areas when you tap the render, cracks that let in rain, and brick or stone crumbling where render has come away.

Not every cement-rendered old house is suffering, but these symptoms are a strong hint. A specialist survey can confirm what the render is made of and how the wall is behaving.

  • Persistent internal damp on outside walls
  • Hollow or drummy areas when tapped
  • Cracks with staining or moss around them
  • Crumbling masonry where render has fallen away
  • White salt crystals or blooms on internal plaster

What lime rendering involves

Lime rendering is skilled, patient work. Failed cement render is carefully removed to avoid damaging the masonry underneath. The wall is cleaned, loose material raked out and dampened to control suction. Lime render, made from natural hydraulic lime or lime putty mixed with well-graded sharp sand, is then applied in several coats, each allowed to firm up before the next.

Curing is slow and must be managed. Fresh lime needs protection from rain, frost, sun and drying winds, often with hessian sheeting kept damp. Lime work is usually avoided in winter. The final coat is commonly finished with several coats of limewash, which adds colour and a protective, breathable layer.

Other ways to help an old wall dry out

Changing the render is only part of the answer. Solid walls stay drier when water is kept away from them in the first place. Check gutters and downpipes for leaks and blockages, because a single overflowing gutter can soak a wall for years. Make sure ground levels outside sit well below internal floor levels, and remove soil, planters or hard paving built up against the wall over time.

Inside, avoid sealing the wall with impervious finishes such as vinyl wallpaper, gypsum plasters over damp masonry or non-breathable paints, which trap moisture from the other side. Good ventilation helps, especially in kitchens and bathrooms. Re-pointing with lime mortar where cement pointing has failed lets the joints breathe too. Taken together with lime render, these measures usually do more for a damp period home than chemical injections or waterproof coatings, which can make things worse on breathable masonry. A specialist familiar with traditional buildings can look at the whole picture rather than treating the render in isolation.

Listed buildings and consent

Listed buildings need listed building consent for changes to their external finish. Conservation officers generally expect lime on historic fabric and will not usually accept replacing lime with cement. If your listed home already has cement render that is causing harm, consent is often given to replace it with lime.

In conservation areas, planning permission may be needed for changes to the external appearance. BS EN 13914-1 covers external rendering, and Historic England publishes guidance on traditional building materials that is worth reading if you own a historic home.

Cost and maintenance

Lime render typically costs £70–£120 per m², more than cement-based systems because of the extra labour and longer programmes. Limewash needs renewing every few years, especially on exposed elevations, but it is cheap to apply. We arrange vetted, insured local specialists experienced in lime work who survey the wall first and explain what it needs. Ask to see examples of previous lime work and how they plan to protect fresh render from the weather, because careful curing is what separates a lasting lime finish from one that cracks or powders within a few winters.

Questions people also ask

Should I remove cement render from my old house?

If your solid-walled house shows signs of trapped moisture, such as internal damp, hollow render or decaying masonry, replacing cement render with lime is often recommended. Removal must be done carefully to avoid damaging the wall. Get a survey first, and check whether listed building consent or planning permission is needed.

How long does lime render take to cure?

Each coat needs several days to firm up before the next, and full carbonation continues for weeks or months. Fresh lime must be protected from rain, frost, sun and drying winds. That is why lime rendering programmes are longer than for cement or silicone systems, and why winter work is usually avoided.

Can I paint lime render with masonry paint?

It is better not to. Many masonry paints reduce breathability and can trap moisture, undoing the benefit of lime. Limewash is the traditional finish, and some breathable mineral paints are compatible. Check with your specialist before applying any coating to lime render.

Written and checked by the House Rendering team. Read our editorial policy.

Get a free house rendering quote

Tell us what you need and we'll come back with a clear price.

Request a quote