House Rendering
External Wall Insulation with Render
Insulation boards fixed to the outside of solid walls, then finished in a mesh-reinforced basecoat and decorative render.

What's involved
External wall insulation is the most effective way to insulate a solid-walled home without losing room space. Insulation boards, typically EPS, mineral wool or wood fibre between 50mm and 150mm thick, are bonded and mechanically fixed to the wall, then covered in a reinforced basecoat and a thin-coat silicone or mineral render. The work involves extending window sills, moving downpipes, satellite dishes and meters, and often extending the roof eaves so the insulation is fully protected. Mineral wool and wood fibre are used where fire performance or breathability matter most. A typical semi-detached house takes two to three weeks on scaffold. External insulation changes the appearance of the house and may need planning permission, and work to more than a quarter of the walls can bring in Building Regulations energy requirements.
How we handle it
Tell us about your house
Use the quote form to describe the property, the walls you want rendered, the current finish and the look you want. Photos of every elevation and any cracks or damp patches help the renderer give an accurate quote.
Survey and system choice
A local renderer inspects the walls, tests existing render for hollowness, checks the damp proof course, windows and drainage, and recommends a suitable system: silicone, monocouche, sand and cement or lime, depending on construction.
Quote and sample
You receive an itemised quote covering scaffolding, preparation, beads, mesh, basecoat, finish, making good and waste. Colour samples or a small test panel on the wall help you choose the finish before the work is booked.
Preparation and application
Scaffolding goes up, windows and doors are masked, downpipes are removed and walls are prepared. Beads and mesh are fixed, then each coat is applied and allowed to cure in suitable weather conditions.
Finishing and handover
Downpipes and fittings go back, masking is removed, sills and edges are sealed and the site is cleaned. You walk round with the renderer, receive the system details and any manufacturer guarantee information.
Price guide
House rendering is priced per square metre of wall plus scaffolding, preparation and detailing. The system you choose matters, but so does the wall underneath: removing old render, repairing masonry or fitting insulation all add cost. These are typical UK guide prices for 2026, including labour and materials but excluding major structural repairs.
- Silicone render system: £60–£95 per m². Includes beads, mesh-reinforced basecoat, primer and silicone topcoat in a chosen colour.
- Monocouche render: £55–£85 per m². Through-coloured, single-coat system; best on consistent modern blockwork and new builds.
- Sand and cement render, painted: £45–£70 per m². Two-coat system with masonry paint; cheapest upfront but needs repainting every eight to ten years.
Questions about external wall insulation with render
How much does it cost to render a house in the UK?
Rendering a typical three-bedroom semi-detached house costs £8,000 to £14,000 in the UK in 2026 using a silicone render system, including scaffolding. Sand and cement render is cheaper at around £45 to £70 per square metre, while lime and external wall insulation cost more. Removing old render, repairing walls and complex detailing push the price up.
What is the best render for a house?
Silicone render is the best all-round choice for most modern brick and block homes because it is flexible, breathable, water-repellent and comes through-coloured. Monocouche suits new blockwork, while sand and cement is the budget option. For solid-walled homes built before around 1920, breathable lime render is usually the right choice to avoid trapping moisture.
How long does house render last?
A good silicone or monocouche render system typically lasts 25 to 30 years or more, while painted sand and cement render can last decades but needs repainting every eight to ten years. Lime render can last generations with periodic limewashing. Lifespan depends heavily on correct preparation, beads, a bellcast above the damp proof course and keeping gutters working.
Other services
Silicone Render
Thin-coat, through-coloured silicone render over a mesh-reinforced basecoat, water-repellent and self-cleaning in most conditions.
Monocouche Render
Through-coloured, single-coat cement-based render sprayed or trowelled in one thick pass, then scraped to an even texture.
Sand and Cement Render
Traditional two-coat render of a scratch coat and float coat, finished smooth for painting or textured with a roughcast or dash.
Lime Render
Breathable natural hydraulic lime or lime putty render for solid-walled period homes, cottages and listed buildings.
Render Painting and Coating
Cleaning, repairing and repainting existing render with masonry paint or elastomeric coatings to refresh and protect it.
External Wall Insulation with Render near you
Get a free house rendering quote
Tell us what you need and we'll come back with a clear price.
Request a quote