House Rendering

House Rendering

Render Painting and Coating

Cleaning, repairing and repainting existing render with masonry paint or elastomeric coatings to refresh and protect it.

Free House Rendering quote

No obligation. We only use your details to reply about this job.

Render Painting and Coating — House Rendering

What's involved

If your existing render is sound but stained, faded or covered in fine cracks, a repaint can give it years more life at a fraction of the cost of re-rendering. The decorator first tests for hollow patches, cuts out and repairs any defects, then washes the walls and treats algae and lichen with a biocide. Fine cracks are filled or bridged with a flexible filler. Bare patches get a stabilising primer, then two coats of high-quality masonry paint, or a flexible elastomeric coating that bridges hairline cracks. Smooth and textured masonry paints are both available, and modern silicone-based paints resist dirt better than standard acrylics. A semi-detached house usually takes three to five days with scaffold or towers. Painting needs dry walls and settled weather, so most work is done from April to October.

How we handle it

  1. Tell us about your house

    Use the quote form to describe the property, the walls you want rendered, the current finish and the look you want. Photos of every elevation and any cracks or damp patches help the renderer give an accurate quote.

  2. Survey and system choice

    A local renderer inspects the walls, tests existing render for hollowness, checks the damp proof course, windows and drainage, and recommends a suitable system: silicone, monocouche, sand and cement or lime, depending on construction.

  3. Quote and sample

    You receive an itemised quote covering scaffolding, preparation, beads, mesh, basecoat, finish, making good and waste. Colour samples or a small test panel on the wall help you choose the finish before the work is booked.

  4. Preparation and application

    Scaffolding goes up, windows and doors are masked, downpipes are removed and walls are prepared. Beads and mesh are fixed, then each coat is applied and allowed to cure in suitable weather conditions.

  5. Finishing and handover

    Downpipes and fittings go back, masking is removed, sills and edges are sealed and the site is cleaned. You walk round with the renderer, receive the system details and any manufacturer guarantee information.

Price guide

House rendering is priced per square metre of wall plus scaffolding, preparation and detailing. The system you choose matters, but so does the wall underneath: removing old render, repairing masonry or fitting insulation all add cost. These are typical UK guide prices for 2026, including labour and materials but excluding major structural repairs.

  • Monocouche render: £55–£85 per m². Through-coloured, single-coat system; best on consistent modern blockwork and new builds.
  • Sand and cement render, painted: £45–£70 per m². Two-coat system with masonry paint; cheapest upfront but needs repainting every eight to ten years.
  • Full semi-detached house in silicone render: £8,000–£14,000. Typical total including scaffolding, preparation and removing light existing coatings.

Questions about render painting and coating

How much does it cost to render a house in the UK?

Rendering a typical three-bedroom semi-detached house costs £8,000 to £14,000 in the UK in 2026 using a silicone render system, including scaffolding. Sand and cement render is cheaper at around £45 to £70 per square metre, while lime and external wall insulation cost more. Removing old render, repairing walls and complex detailing push the price up.

What is the best render for a house?

Silicone render is the best all-round choice for most modern brick and block homes because it is flexible, breathable, water-repellent and comes through-coloured. Monocouche suits new blockwork, while sand and cement is the budget option. For solid-walled homes built before around 1920, breathable lime render is usually the right choice to avoid trapping moisture.

How long does house render last?

A good silicone or monocouche render system typically lasts 25 to 30 years or more, while painted sand and cement render can last decades but needs repainting every eight to ten years. Lime render can last generations with periodic limewashing. Lifespan depends heavily on correct preparation, beads, a bellcast above the damp proof course and keeping gutters working.

Get a free house rendering quote

Tell us what you need and we'll come back with a clear price.

Request a quote