House Rendering glossary
The terms you'll come across, explained in plain English.
- Angle bead
- A metal or plastic profile fixed to external corners so the render forms a straight, strong edge that resists knocks.
- Basecoat
- The reinforcing layer in thin-coat render systems, usually with glass fibre mesh embedded in it, that provides strength and crack resistance under the finish.
- Bellcast bead
- A shaped bead fixed above the damp-proof course that kicks the bottom of the render outwards so water drips clear and the render does not bridge the DPC.
- Damp-proof course
- A horizontal barrier near the base of a wall that stops ground moisture rising. Render should stop above it, not bridge it.
- External wall insulation
- Insulation boards fixed to the outside of a wall and finished with a mesh-reinforced basecoat and render, improving thermal performance.
- Float coat
- The second coat in traditional render, levelled and finished with a float to give a flat surface ready for painting or a final texture.
- Hacking off
- Removing old render or pebbledash back to the masonry, usually with hammers and chisels, before new render is applied.
- Limewash
- A traditional breathable finish made from lime and water, sometimes with pigments, applied in thin coats over lime render.
- Monocouche
- A through-coloured, cement-based render applied in one thick pass and scraped to a textured finish. The name is French for single layer.
- Natural hydraulic lime
- A lime binder that sets partly by reaction with water and partly with air, used for breathable renders and mortars on older buildings. Often abbreviated to NHL.
- Reinforcing mesh
- Alkali-resistant glass fibre mesh embedded in the basecoat across the whole wall to spread stresses and reduce cracking.
- Scratch coat
- The first coat of traditional render, scored with a comb while soft so the next coat has a rough surface to grip onto.
- Silicone render
- A thin-coat, through-coloured render containing silicone resins that repel water while letting vapour escape, applied over a mesh-reinforced basecoat.
- Stop bead
- A profile used at edges of render, such as around windows and at party lines, to give a neat, straight termination.
- Suction
- How quickly a wall absorbs water from fresh render. Uneven suction causes patchy drying, so walls are primed or dampened to control it.
Get a free house rendering quote
Tell us what you need and we'll come back with a clear price.
Request a quote